Air Cooled Thermic Fluid Hot Oil Pump
Air Cooled Thermic Fluid Hot Oil Pump FTP-AC Series
Air-cooled Thermic Fluid Hot Oil Pumps is of horizontal, single-stage, single-suction volute type and has a closed impeller. Two robust ball bearings support the shaft to provide extra stability, giving the pump a hear-resistant Egleburgman Make mechanical seal. The suction flange is on the front and in the axial position, while the discharge flange is at the top in the radial position. FTP-AC Series of centrifugal pumps are specifically designed to handle thermal oils up to 350 Deg.C without the need of expensive mechanical seal and auxiliary cooling arrangements.
Design Features
- Flanges as per DIN PN 16 Std
- No external cooling is required in Air Cooled Design.
- High efficient radial multi vane closed type impeller.
- Excellent efficiency, Low NPSH
- Back pull out design ensures quick and easy maintenance,
- Safety packing to eliminate contamination entering the bearing and mechanical seal.Safety packing to eliminate contamination entering the bearing and mechanical seal.
- Long life carbon plain bearing on pump end lubricated by the pumped liquid and radial ball.
- bearing at drive end, grease lubricated for life.
- Large mechanical seal reservoir ensures adequate lubrication to the mechanical seal,
- Shaft sealing by Standard Egleburgman Make mechanical seal.
Technical Parameters
- Head Range : 120 Mtr Max.
- Capacity : 250-300 m3/Hour Max.
- Sealing : Metal Bellow Seal/Egleburgman make
- Pump MOC : WCB/SS-304/SS-316
- Flange Std : DIN PN 16.
- Max handling Temp : 350 Degree
- RPM : 1450/2900 Available
- Impeller Type : Closed
Corrosive Liquid Handling, Fertilizer Plant, Electroplating Industries, ETP Plant, Caustic Soda Plant, rubbing Process Chemical Plants, Alkaline Transfer, Pulp and Paper Industries Etc.
Application
- Food Industries
- Petrochemical and Oil Industries
- Textile Industries
- Heating and Boiler Application.
- Plastic and Rubber Plants.
- Thermal Application.
Technical Features of Thermic Fluid Pumps
- Pump Dimensions comply to ISO 2858/5199 with Flange STD ASA 150.Available in Closed Impeller Construction for Higher Efficiencies.
- Wide Range of Models and MOCs available (Ductile Iron, Cast Steel & Stainless Steel) covering the Maximum Duty Conditions.
Salient Features for Thermic Fluid Pumps
- Two Intrinsic Designs covering wide range of High Temperature Fluids and other Vegetable Oil Applications
- Maximum Temperature handling up to 350o C. Back Ribs on Impeller
- Heat Barrier plate for better heat dissipation.
Pump Casing
Single spiral volute type radially split with integrated suction and discharge ports and also integrally cast feet for baseplate attachment. Thanks to back pullout design, maintenance is much easier as the inside of the pump can be dismounted without needing to disconnect the casing from the pipe-connections. Suction Port is axial and discharge is vertical.
Impeller
The impeller has back Ring & Holes between each fin for the axial balancing of pressures.
Shaft
The impeller is overhung mounted on the end of the end the shaft. The shaft is designed to be able to withstand all mechanical and thermal efforts generated during operation of the pump with minimum deflection. The bearing housing is made of cast iron and apart from serving as the shaft support; it also houses the mechanical seal. It is equipped with external cooling wings.
Shaft Sealing
Shaft sealing is obtained by means of high security mechanical seal placed in the bearing housing, closed to the end call bearing l, near to the shaft end.