Centrifugal Couple Drive Semi Open Chemical Process Pump- FLP-OP Series
Centrifugal Couple Drive Chemical Process Pump (FLP-OP Series) Devoloped in Semi Open Impeller Design for Transfer Slurry based Partical Present in lIquids can be handling Easily with anti chocking Impller vanes.FLP-OP Series are Very Usefull Which Processing liquid with High Amount of Slurry based Abrasive and Non Abrasive Particals which Leads Regular Wear and Tear Rotating Parts.
These are Clear Examples where back Pull Out Pumps play major role in Process Industries.FLP-OP Series offered Following design in various Type MOC in Order to Serve the Above Tough chemical Service in a much Better Way improving the Product Life,Reduce the Product Life Cycle.cost and Reducing the Mean time Beetween pump Failures Due To the Continous easy of Maintanance of Regular intervals.
- Head Range : 120 Mtr
- Capacity : 250 M3/Hour
- Sealing : Gland /Mechanical Seal Fitted
- Pump MOC : WCB/SS-304/SS-316/Alloy 20
- Impeller Type : Semi Open
- Design Type : Couple Drive
- RPM : 1450 / 2850 RPM
- Semi open impeller Handling Solid and Slurry Content Max 40%-50%
- All Impeller have Back Vanes which Helps in Reducing the radial and Axial Thrust On Bearing.
- With Smooth floe Passage and Large Eye area.
- Easy to Maintain Parts of Pumps.
- High Effiecient with Handling Slurry.
- Abrasive and Non Abrasive Both Slurry Handling.
- Antichocking System impeller Design.
Starch Industries,Sugar Industries,Chemical and Pharmaceutical Industries,ETP Plant SlurryWaste water and Chemical Transfer etc.
Top centreline discharge for air handling, Self-venting. Back pullout the design for ease of maintenance. Integral casing feet prevent pipe load miss-alignment longer seal and bearing life. Standard class 150 RF serrated flanges for positive sealing.
Wide range of sealing arrangements available to meet different service conditions, Single Double Unbalanced, Balanced seals can be fitted in the same stuffing box.
Fully opened impeller, Best for handling suspended solids, abrasive, and corrosives liquid. Back pump-out vanes reduce radial thrust loads and seal chamber pressure.
Fully confined gasket at casing joint protects alignment and liquid, makes disassembly easier.
Original flow, pressure and efficiency are maintained by simple external adjustment resulting in long term energy and repair saving.
Heavy-duty shaft designed for minimum defection at seal faces-less than 0.05mm.
Heavy-duty design reduce the load on shaft.
Bearing Frame Foot
Related Pumps
Centrifugal Couple Drive Polypropylene/PVDF Pump –FPP / PVDF Series
This type of pump uses a rotating impeller to move fluids through the system.
Centrifugal Magnetic Drive PP Pump
This is a pump that uses a rotating impeller to move fluids, typically used for transferring liquids.
Centrifugal Polypropylene Pump
This is a type of pump that uses a rotating impeller to move liquids through a system.